Wednesday, September 22, 2010

wide plank plywood flooring how to










the new flooring has been installed in Megan's farmhouse kitchen







remember what it used to look like






this is what it looks like now - minus the base molding 


 





the farmhouse is over 100 years old and the floors are sort of wavy in some areas
because the plywood is only 1/4" thick and very flexible it worked well on the uneven surface




 




the kitchen measures 17' by 13'

ten sheets of 4' x 8' plywood were needed to make the floor

they were purchased at The Home Depot for $19.37 each for a total of $193.70

we also purchased six (we ended up using five)  28oz tubes of  PL400 Heavy Duty Sub-floor & Construction Adhesive $4.98 each  totaling $29.88

 one box of flooring nails $17.00

1 gallon of Benjamin Moore flat latex ceiling paint tinted rockport gray $13.00

 gallon of Varathan floor finish $59.00

total materials cost $299.58 









the plywood was cut on the four foot side into six 8" width sections so that there would be no waste







we painted them using a wash technique using 50% water 50% paint then put the boards in the sun to dry







here they are lined up outside to dry







the top layer of original vinyl  was easily pulled up from Megan's kitchen floor, we attached the new wide plank floors directly to the sub floor that was underneath







the boards were then cut into shorter lengths - we used 4, 5 and 6 foot pieces with shorter ones as needed to avoid waste.  They were placed down in a random pattern.  Once we figured where the plank was going to go we covered the back with the flooring adhesive and nailed it into place. 






we used a penny as the perfect spacer.  A few hours later we pulled out all the pennies and applied the first coat of varathane water based floor finish using a lambswool pad









the next day a final coat of varathane was applied, it was dry in a few hours.  The dogs have been testing it out for durability - so far so good










here are some more things we have been working on












these linen curtains were made from an old bed skirt











these are the industrial brackets that I picked up for $10 with some barn wood shelving










we have nine more days to go till the dead line.  See you soon, Lori



7 comments:

  1. I love how you did this! Thank you for sharing the details. Pinning this!

    ReplyDelete
  2. How did you cut the T&G on all sides of the plywood?

    ReplyDelete
  3. Love the shelf brackets - where did you find them? I'm looking for something similar. Thanks.

    ReplyDelete
  4. What is the paint color used? Looks good.

    ReplyDelete
  5. All plywood are really looks beautiful. Thank you for that.
    Plywood Company in India


    ReplyDelete
  6. Use a single color throughout, the slight variation in shade from a handcrafted tile adds subtle sophistication. flooring okc

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...